Simulation

K142 Liquid cold plate thermal solution

Solution1:Power :=150*6+180*6=2640w; Al6061 plate Input flow rate 0.004m³/min ( 4L/Min) Environment 55℃ Liquid cold plate surface Max temperature is below 55 ℃ The temperature difference of the same chip type is about 3 ℃

3400W Skived fin heat sink thermal solution

Mode:Power 3*300W+6*420W=3420W; Al1060 + Heat pipes Input flow rate 8m/s Environment 35℃ The Max temperature of heat sink surface is below 85 ℃

Liquid cooling plate pressure simulation case

Apply simulation software to analyze the mechanical properties of the liquid cooling plate, and analyze in detail the deformation and stress distribution of the liquid cooling plate under internal pressure load conditions, so as to evaluate the rationality of the liquid cooling plate structure design and the friction welding span of the upper cover plate, and provide a theoretical basis for the optimal design of the liquid cooling plate structure.

Electronic equipment thermal simulation case

Analyze the pressure, flow rate and temperature distribution of the whole equipment in detail to provide a theoretical basis for the heat dissipation optimization design of the equipment; design the heat sink and heat dissipation solution to meet the following requirements -At an ambient temperature of 50℃, the device surface temperature is lower than 95℃.

Liquid Cooling Plate Thermal Simulation Case

Use simulation software to design liquid cooling plates to meet performance requirements, analyze the pressure, flow, and temperature distribution in the entire liquid cooling system in detail, and provide a theoretical basis for the optimal design of the liquid cooling system

Heat sink thermal simulation case

Use simulation software to design the heat sink and select the appropriate fan to meet the product's heat dissipation performance requirements

< 1 > proceed page